Dogyu Japanese Carpenter's Pry Bar

Made in Japan

• Drop-forged & tempered for strength
• Nail puller, prying tool, hammer, & scraper all in one tool
• 90° angle nail puller paw
• Pry bar end is flared with a special curve
• Rounded head on nail puller improves leverage
• The size is excellent for your tool bag

• Product Description
• Specs

• 
  

  This drop-forged & tempered Dogyu Japanese carpenter's pry bar is designed with professionals in mind. Nails can be pulled with either the V-shaped curved tail, or the 90° angled paw. If you need a hammer, the solid flat surface at the back of the paw can be used to pound nails. Finally, the curved flared end also acts as a scraper & wedge. It is especially great for prying into seams & joints, & for the removal of base trim with minimal damage. The Dogyu Japanese Carpenter's Prybar is a smart tool that will decrease the number of tools needed to get the job done, making the work faster & the load lighter. One of our most popular items!

• Product	Nail Puller Head Size	Flared End Width	Overall Length	Model #
  Dogyu Japanese Carpenter's Pry Bar ~ 150 mm	1-9/16" Long	1-1/2" Wide	150 mm (6")	DYU-002919
  Dogyu Japanese Carpenter's Pry Bar ~ 200 mm	2" Long	1-7/8" Wide	200 mm (7-5/8")	DYU-002933
  Dogyu Japanese Carpenter's Pry Bar ~ 250 mm	2-1/4" Long	1-7/8" Wide	250 mm (9-3/4")	DYU-011409
  Dogyu Japanese Carpenter's Pry Bar ~ 300 mm	2-3/8" Long	2" Wide	300 mm (11-7/8")	DYU-010273

   

  For California Residents:

  
  

  WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

  
  

  WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood